Functions And Settings; Operation; Basic - ProLights LUXOR User Manual

10

- 3 - FUNCTIONS AND SETTINGS

3.1 OPERATION

Connect the supplied main cable to a socket (100-240V~/50-60Hz). Switch on the unit with the power
switch. The unit will run built-in program to reset all motors to their home position. Shortly after that the
LUXOR is ready for operation.
After operation, switch off the unit with the power switch.

3.2 BASIC

The LUXOR has a LCD display and 4 button used to access the control panel functions and manage them
(fig.7).
NOTE - Never wait for more than 60 seconds to press the next button, otherwise the procedure for setting
enter into stand-by mode.
MENU
Used to access the menu or
to return a previous menu
option
LUXOR
POWER
DMX Address
001
Md.123ch.
DMX
UP
Navigates upwards through
the menu list and increases
the numeric value when in
a function
30°C
MENU
Fig.7
DOWN
Navigates downwards through
the menu list and decreases
the numeric value when in a
function
ENTER
ENTER
Used to select and store the
current menu or confirm the
current function value or
option within a menu