Display Setting - ProLights LUXOR User Manual

On if DMX On - [On if DMX On] -
• In the On if DMX On mode you can turn on the lamp when detected DMX signal.
• Press UP/DOWN button to select Yes or No to enable or disable the function.
Off if DMX Off - [Off if DMX Off] -
• In the Off if DMX Off mode you can turn off the lamp when cut DMX signal.
• Press UP/DOWN button to select Yes or No to enable or disable the function.
Ignotion Delay - [Ignotion Delay] -
• In the Ignotion Delay mode, it is possible delay time between power on and lamp on
• Press UP/DOWN button to select the value desired 0 S - 255S
Low Power Delay - [Low Power Delay] -
• In the Low Power Delay mode, it is possible delay time between reduce lamp power and shutter/
dimmer off the unit .
• Press UP/DOWN button to select the value desired 0 S - 255S

3.12 DISPLAY SETTING

1. Press the MENU button to enter the main menu and scroll using UP/DOWN button to select Display
Setting, and then press ENTER button.
2. Use UP/DOWN button to select: Display Inverse - Backlight Auto Off - Backlight Intensity - Temperature Unit.
3. Press ENTER button to confirm the selection.
4. Press the MENU button to go back or to meet the waiting time to exit from the setup menu automati-
cally.
Display Inverse - [Display Inverse] -
• In the Display Inverse mode you can reverse dispaly
• Press UP/DOWN button to select Yes or No to enable or disable the function.
Backlight Auto Off - [Backlight Auto Off] -
• In the Backlight Auto Off mode you can enable blackout function
• Press UP/DOWN button to select Yes to set display off one minute after exit menu mode or No to set
dispaly always on
Backlight Intensity - [Backlight Intensity] -
• In the Backlight Intensity mode, it is possible set backlight intensity
• Press UP/DOWN button to select the value desired 1 - 10
Temperature - [Temperature] -
• In TEMPERATURE C/F mode you can set temperature unit: use UP/DOWN button to select Celsius degree/
Fahrenheit degree.
LUXOR
17