Information; Lamp Settings - ProLights LUXOR User Manual

16

3.10 INFORMATION

1. Press the MENU button to enter the main menu and scroll using UP/DOWN button to select FIXTURE
INFORMATION, and then press ENTER button.
2. Use UP/DOWN button to select: Fixture use time - Lamp On time - Fireware Version.
3. Press ENTER button to confirm the selection.
4. Press the MENU button to go back or to meet the waiting time to exit from the setup menu automati-
cally.
Time information - [Fixture use time] -
• In the Fixture use time mode you can display show the fixture working hours.
Lamp on time - [Lamp On time] -
• In the Lamp On time mode you can display show the working hours of lamp.
• Select, by using the UP and DOWN button, Exit or Reset Time menu voice, for exit or reset the counter
Product information - [Fireware Version] -
• Through the Fireware Version function you can display the fireware version of the device.
• Press ENTER button to view the firmware data.

3.11 LAMP SETTINGS

1. Press MENU button to enter the main menu and scroll with UP/DOWN button to select LAMP CONTROL,
then press ENTER button.
2. Use UP/DOWN button to select: On/Off - State/Power On - Off Via DMX - On if DMX On - Off if DMX off - Ignition
Delay - Low Power Delay.
3. Press ENTER button to confirm the selection.
4. Press the MENU button to go back or wait some seconds for automatic exit from the menu.
On/Off - [On/OFF] -
• In the On/OFF mode you can turn on/off the lamp from the control panel.
• Press UP/DOWN button to select ON or OFF.
State/Power On - [State/Power On] -
• In the POWER ON LIGHT mode you can set lamp state while the unit is power on.
• Press UP/DOWN button to select ON or OFF to enable or disable the function.
Off Via DMX - [Off Via DMX] -
• In the Off Via DMX mode, it is possible turn off the unit via DMX controller
• Press UP/DOWN button to select ON or OFF to enable or disable the function.
LUXOR