Safety Instructions; Personal Protective Equipment; The Machine's Safety Equipment - Husqvarna 323P4 Operator's Manual

Hide thumbs Also See for 323P4:
Table of Contents

Advertisement

Personal protective equipment

IMPORTANT INFORMATION
If used incorrectly or carelessly this machine
can become a dangerous tool that can cause
serious or fatal injury to the operator or others. It
is extremely important that you read and underst-
and the content of this manual.
When using the machine, personal protective
equipment approved by the appropriate
authorities must be used. Personal protective
equipment does not eliminate the risk of
accidents. However, it can reduce the effects of
an injury in the event of an accident. Ask your
dealer for help when choosing protective
equipment.
!
WARNING!
Remove your hearing protection as soon as
you stop the engine, so that you can hear
any noises or warning signals.
GLOVES
Gloves must be worn
whenever required, for
example when fitting,
inspecting or cleaning
cutting equipment.
PROTECTIVE HELMET
AND VISOR
EAR PROTECTION
Ear protection offering
sufficient dampening effect
should be used.
EYE PROTECTION
Blows from branches or
objects thrown out by the
cutting equipment can
damage the eyes.
BOOTS
Use anti-slip and stable
boots.
CLOTHING
Wear clothes made of a
strong fabric and avoid loose
clothing that can catch on
shrubs and branches. Always
wear heavy, long pants. Do
not wear jewelry, short
pants, sandals or go barefoot.
Secure hair so it is above
shoulder level.
FIRST AID KIT
The operator must carry a
first aid kit.
4
– English

SAFETY INSTRUCTIONS

The machine's safety equipment

This section describes the machine's safety equipment, its
function and how checks and maintenance are carried out to
ensure that it operates correctly. (See the chapter "What is
what" to locate where this equipment is positioned on your
machine.)
!
WARNING!
Never use a machine with defective safety
equipment. Follow the control, maintenance
and service instructions described in this
section.
1. Throttle trigger
lock
The throttle trigger lock is
designed to prevent the
throttle from accidentally
being engaged. When the
trigger lock (A) is pressed
into the handle (= when you
hold the handle) the throttle
(B) is released. When the
grip on the handle is
released the throttle and the
throttle trigger lock return
to their original positions.
This takes place via two
independent return spring
systems. This means that the
throttle is automatically
locked in its "idling"
position.
2. Stop switch
The stop switch should be
used to stop the engine.
A
B

Advertisement

Table of Contents
loading

This manual is also suitable for:

325p4x series325p5x series

Table of Contents