Husqvarna 323P4 Operator's Manual page 27

Bar and chain combinations
The following combinations are CE approved.
Bar
Length, Pitch, Max. no of teeth
inches inches on tip sprocket
10 3/8 7 T
12 3/8 7 T
10 3/8 7 T
12 3/8 7 T
Type Inch Inch/mm
91VG 3/8" 0,050"/1,3
S 36 3/8" 0,050"/1,3
90SG 3/8" 0,028"/1,1
EC declaration of conformity
Husqvarna AB, SE-561 82 Huskvarna, Sweden, tel +46-36-146500, declares under sole responsibility that the pruning
saws Husqvarna 323P4, 325P4 and 325P5 from 2002s serial number and onwards (the year is clearly stated in plain text
on the type plate with subsequent serial number), are in conformity with the requirements of the COUNCIL'S DIRECTIVE:
- of June 22, 1998 "relating to machinery" 98/37/EC, annex IIA.
- of May 3 1989 "relating to electromagnetic compatibility" 89/336/EEC, and applicable supplements.
The following standards have been applied: EN292-2, CISPR 12:1997, EN ISO 11680-1.
Notified body: 0404, SMP Svensk Maskinprovning AB, Fyrisborgsgatan 3, SE-754 50 Uppsala, Sweden, has carried out
EC type examination in accordance with the machinery directive´s (98/37/EC) article point 2c. The certificates for EC type
examination in accordance with Annex VI, are numbered: 04/01/841 – 323P4, 404/01/803 – 325P4, 404/02/863 – 325P5.
The supplied pruning saw conforms to the example that underwent EC type examination.
Huskvarna January 3, 2002
Bo Andréasson, Development manager
TECHNICAL DATA
Chain
Husqvarna S 36/Oregon 91 VG
Husqvarna S 36/Oregon 91 VG
Oregon 90 SG
Oregon 90 SG
1
5
Inch/mm Angle
5/32" /4,0 85°
5/32" /4,0 85°
5/32"/4,0 85°
(Only applies to Europe)
Angle Angle Inch/mm
30° 0° 0,025"/0,65
30° 0° 0,025"/0,65
30° 0° 0,025"/0,65
L
Inch/cm: dl
10"/25:40
12"/30:45
10"/25:40
12"/30:45
10"/25:40
12"/30:45
27
English –