Transpose Center Pitch; Velocity; Fixed Velocity Value; Tempo Knob Mode - Arturia Keystep User Manual

This parameter also affects the way the KeyStep responds to incoming MIDI notes on the
Transposition Input channel.

10.9.3.7 Transpose Center Pitch

The Center pitch decides which incoming note means "don't transpose". The default
value is MIDI note #60, or middle C [C3].
So for example, an incoming C3 won't transpose the sequence, but an incoming D3 will
transpose the sequence +2, etc.

10.9.3.8 Velocity

This parameter determines whether the sequencer will preserve the velocity values of
the original performance or set all recorded notes to the same value.

10.9.3.9 Fixed Velocity value

This sets the velocity value for all recorded notes to the same number if the Velocity
parameter is set to Fixed, not 'As Recorded'.

10.9.3.10 Tempo knob mode

If you're performing live and you want to speed up the tempo or slow it down without a
sudden change in value, this parameter will allow you to do that.
Jump: The tempo value will respond immediately when the Rate knob is turned.
Pickup: The tempo will not change until the Rate knob passes through the current value.

10.9.3.11 Tap Tempo average

This lets you set your preference for how many times the Tap button must be pressed
before the tempo will change.
66 ARTURIA – KeyStep – USER'S MANUAL