Sequence Settings - Arturia Keystep User Manual

10.9.3 Sequence settings

Here's a quick reference chart for those parameters:
Parameter
Sync Clock In/Out settings
Sync Clock Start
Next Seq
Transposition Input port
Transpose Input channel
Transposition Latch
Transpose Center Pitch
Velocity
Fixed Velocity value
Tempo knob mode
Tap Tempo average
64
Range/Values
1step (Gate/Clock),
1pulse, 24ppq, 48 ppq
On Clock, On Gate Start
End, Instant Reset,
Instant Continue
USB, MIDI, both
1-16, all
On, off
Full MIDI note range
As recorded, fixed
0-127
Jump, pickup
2, 3, or 4 taps
Description/Function
Set Sync input/output type.
Refer to external
documentation to determine
what the settings should be.
Determines which sort of
signal will start KeyStep.
Selects when the KeyStep
sequences will change and
whether they'll start from
the top or the middle.
Sequences
transposed
devices. This decides which
ones are allowed to do so.
Specifies the MIDI channel
to obey for transposition.
Decides whether
sequence will
transposed while a key is
held down.
Notes above/below center
transpose the
up/down
Disregard velocity or not
Set the preferred value
Tempo can jump to knob
position or wait for passthru
Number of taps to respond
ARTURIA – KeyStep – USER'S MANUAL
device
can be
by external
a
only be
sequence