Seq Tab; Device Settings Tab; Sequence Window - Arturia Keystep User Manual

Simply click on a tab to select its window.

10.6.3 Seq tab

The Seq tab contains eight numbered sequence tabs:
These tabs allow you to select each of the sequences and fine-tune their note data. You
can even create brand new sequences here.
In the graphic above sequence #6 is selected. From here you can view and edit the
Length, Swing % and Gate settings for this sequence. It is also possible to edit the pitch,
velocity, and gate time of individual notes. You can even add notes, build chords, and
more.
We'll go through each of the sequence editing features in section 10.7.

10.6.4 Device Settings tab

All of the Device Settings are contained within this tab. To view them within the MIDI
Control Center, use the scroll bar on the right side of the window.
We'll go through each group of parameters in section 10.9.
10.7

Sequence window

Below the individual sequence tabs is the sequence window. Right below the tabs are a
two virtual knobs and a pull-down menu. These are the per-sequence parameters.
The sequence window also has a note window with a piano-style keyboard along the left
side. To the right of this keyboard is a grid with horizontal rows for note placement that
correspond to the virtual keys. The vertical columns represent the steps within the
sequence.
ARTURIA – KeyStep – USER'S MANUAL
The Seq tab
53