Table of Contents
Advertisement
2. ACTIVATION AND FIRST START
The Arturia Flanger BL-20 plug-in works on computers equipped with:
Windows 7 or later and macOS 10.10 or later.
You can use the Flanger BL-20 plug-in as an Audio Unit, AAX, VST2 or VST3 plug-in (64-bit
only).
2.1. Activate the Arturia Flanger BL-20 license
Once the software has been installed, the next step should be to activate your license, so
that you can use it without limitations.
This is a simple process that involves a different software program: the Arturia Software
Center.
2.1.1. The Arturia Software Center (ASC)
If you have not already installed the ASC, go to this web page:
https://www.arturia.com/support/updates&manuals
Look for the Arturia Software Center at the top of the page, and then download the version
of the installer that you need for your system (macOS or Windows).
Follow the installation instructions and then:
•
Launch the Arturia Software Center (ASC)
•
Log into your Arturia account
•
Scroll down to the My Products section of the ASC
•
Click the Activate button
That's all there is to it!
2.2. Working with plug-ins
Flanger BL-20 can be used in all major digital audio workstations (DAWs), including Live,
Logic, Cubase, Pro Tools and others, as it comes in all the main plug-in formats. Unlike what
happens with hardware, you can load as many instances of the effect as you find useful.
Flanger BL-20 has two other big advantages over hardware:
•
You can automate numerous parameters using your DAW's automation system;
•
Your settings and current plug-in state will become recorded in your project, and
you can pick up exactly where you left off the next time you open it.
Arturia - User Manual Flanger BL-20 - ACTIVATION AND FIRST START
5
Advertisement
Table of Contents
