Clear Last; Saving Sequences - Arturia Keystep User Manual

Portable usb midi controller
Hide thumbs Also See for Keystep:
Table of Contents

Advertisement

Remember: the CV/gate outputs will drive a single voice on a monophonic
synthesizer. The MIDI Control Center has a parameter that specifies which note will
be favored when a chord exists in a sequence step. See chapter 10 for details.
5.3.2

Clear Last

This feature allows you to remove the last step of a sequence. It works whether the
sequencer is playing or recording, and even works if the sequencer is not running at all.
To clear the last step of a sequence:
Make sure the proper sequence is selected
Hold the Shift button
Press the Stop button (Clear Last)
If the sequencer is running during this process, the next time it loops around to the end
of the sequence the last step will have been removed.
The Clear Last function does not undo the last recording you made; it shortens
the sequence by removing the last step

5.4 Saving sequences

KeyStep allows you to carry 8 sequences with you at all times. But you can store an
unlimited number of sequences using the MIDI Control Center. So be sure to back up
your hard work to your computer often.
And once the sequences are safely stored on your computer it is possible to hand-pick
sets of sequences that are aimed at particular audiences or sessions.
See chapter 10 for more information about the MIDI Control Center.
32
ARTURIA – KeyStep – USER'S MANUAL

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents