Copy/Paste Notes; Note Velocity; Change The Gate Time - Arturia Keystep User Manual

Note: if one of the selected notes moves outside the MIDI note range, the entire piano
roll will glow red. The same thing happens if the notes are moved beyond the 1
steps in the sequence.

10.7.3.3 Copy/paste notes

After selecting a group of notes you can make another copy of those notes in another
section of the sequence. Just hold the Alt key (Option on a Mac), select one of the notes,
and drag them all into the new area.
The new notes will have the same velocity and gate time values as the original notes.

10.7.3.4 Note velocity

If you click on the top of a note box you will see the cursor become a vertical arrow icon.
Drag the cursor up and down to change the velocity of that note to a value between 1
and 127.
The color of the selected note will change to indicate the velocity value: white is the
lowest velocity value and red is the highest velocity value.
When the velocities of multiple notes are edited at the same time they will all change to
the same value.

10.7.3.5 Change the Gate time

If you click on the right edge of a note box you will see the cursor become a horizontal
arrow icon. Drag the cursor left and right to change the gate time of that note.
There are only two possible values: the Gate Length you selected for the entire sequence
(10, 25, 50, 75, or 90%) or a value of TIE.
ARTURIA – KeyStep – USER'S MANUAL
st or 64 th
57