A/B Settings And Copy - Arturia REV LX-24 User Manual

Everything you'll need to know about managing Presets will be covered in detail in
chapter [p.30]. This includes working with Favorites, which are tagged by clicking the heart
icon.

Note: A Preset marked with an asterisk (*) as shown here indicates that you've edited it.

5.1.3. A/B Settings and Copy

Each Preset is actually two Presets in one! Using the A and B buttons, you can switch
between two completely different sets of knob settings in the
Advanced Panel [p.14]. These are saved within each Preset.
When A is active, clicking A > B will copy the A settings to B. When B is active, clicking A < B
will copy the B settings to A.

! When you edit settings in a Preset and close your DAW project without saving the Preset, the
changes will be remembered when you reopen it – but they will be recalled in Slot A. That means that
editing settings in Slot B and closing your DAW without saving them will move those settings over to
Slot A when you reopen the project... and Slot B will be blank. Save often!
Arturia - User Manual REV LX-24 - User Interface
Everything all at once!
the next
Main Panel [p.8], and the
24