System Configuration Menu - Sony LMD-2735MD Instructions For Use Manual

System Configuration menu

Submenu Setting
Control Lock
Control Lock Set when you want to limit the
operation of the control panel. Set to
"Off" for no limit, "On" to limit.
Lock Mode Sets the range to limit the operation of
the control panel. This setting is
available when "Control Lock" is set to
"On. "
Menu: Limits the menu operations

other than the control lock setting.
Menu&Button: Limits all operations

other than the control lock setting.
OSD Setting
Menu Position Sets the screen position for the OSD
menu.
Set the position of the OSD menu with
the "Upper Left, " "Upper Right, " "Lower
Right, " "Lower Left, " and "Center"
icons.
Status Display Port, Flip Pattern, input connector
name, signal format, PIP/POP mode,
and control lock are displayed.
Select Port Input Terminal
Flip Pattern PIP/POP mode display
Operation lock display
Signal Format
display
Submenu Setting
Auto: The format and scan mode are

displayed for about 3 seconds when
the content of Status Display is
changed.
On: The format and scan mode are

always displayed.
Off: The format and scan mode are

not displayed.
Notes
Even if the setting is set to "Auto" or

"Off, " the flip pattern is available.
For details about the signal format,

refer to no signal and incompatible
signal displays.
Input
No signal
Non compatible
signal (except for
DVI-D)
Non compatible
signal (DVI-D)
Language You can select the menu or message
language from the following languages.
English: English

: Chinese


Italiano: Italian

Español: Spanish

Deutsch: German

Français: French

Русский: Russian

Power On Setting
Power On Mode Selects the setting when the monitor is
turned on from the following settings.
Last: The setting when the monitor

was last turned off.
Default Setting: The setting that is

set in the default setting.
User1 to 20: The selected user

setting.
Logo Select the logo when the power turns on
from among "On - 5sec, " "On - 10sec, "
"On - 30sec, " "On - 60sec, " "On -
120sec, " "Off. "
Power Save
Energy Saving Selects the energy saving mode.
Mode Off: Turns the energy saving mode

off.
On: Dims the backlight.

Signal format
display
No Sync
Unknown
Out Of Range
: Japanese
Adjustment Using the Menus
23