Location and Function of Parts and Controls
Front Panel
Power indicator
When the power is turned on, the power indicator lights
in green.
When the protection function is activated and the
display brightness is reduced due to the rise in
temperature, it flashes in green.
When the unit switches to the standby state, it lights in
orange.
CONTROL button
Displays or clears the operating buttons on the front
panel.
Selects the items depending on the menu types.
OSD menu operation buttons
MENU button
Press to display the on-screen menu.
Press again to clear the menu.
/// buttons
Press to select the items and setting values.
CUSTOM button
12
Location and Function of Parts and Controls
Turns on or off the assigned function. You can adjust the
assigned function by pressing the / buttons. (Refer to
the custom buttons of the system configuration menu on
page 24 and of the default setting on page 25.)
The following functions are assigned in the default
setting.
CUSTOM 1: Brightness
CUSTOM 2: Contrast
CUSTOM 3: Flip
Multi-image display setting buttons
PIP/POP: For displaying the multi-image display
or switching the multi-image display mode.
SWAP: For swapping between the main display
and the sub display.
Note
If the combination of input assigned to each port is set
to VIDEO and S VIDEO, the multi-image display is
not displayed.
Input select buttons