Dmx Operation; Dmx Modes - Martin Wizard User Manual

DMX
OPERATION
The Wizard can be connected to and operated from a DMX controller. To do this
you need to:
1 Choose and set one of the three DMX modes. The three modes are described in
the following section, "DMX modes".
2 Set a DMX control address. This is described in "DMX control address" on page 21.
D M X M O D E S
The Wizard has three DMX modes to choose from:
• 1-channel mode provides control of the built-in stand-alone features.
• 6-channel mode provides position control of all effects. This is the default factory
set mode.
• 8-channel mode provides position control of all effects, plus control of the mirror
drum swivel rate, and the color and gobo wheel change speed.
1-channel DMX op eration
The functions shown in the following table are available in 1-channel mode.
When a "stand-alone" function is selected, the fixture steps through a routine
using a built-in microphone to trigger the action to the beat of the music. Note
that multiple fixtures cannot be synchronized in this mode.
DMX value Percent
0-10 0-3
11-20 4-7
21-80 8-31
81-115 32-44
116-140 45-54
141-175 55-68
176-210 69-82
211-255 83-100

DMX operation

Function
Light off
Light on
Strobe
Slow music trig (every 2 seconds)
Medium music trig (every second)
Fast music trig (every 0.2 seconds)
Random music trig (between 0.2-2.0 seconds)
Trigger whenever DMX value 240 is crossed
7
19