Placing Your Stove - Pelpro PPC90 User Manual

Installing Your Stove

Placing Your Stove

Stove must be installed on a non-combustible floor.
1
If needed, place floor protection (such as a hearth
pad) beneath the stove. Move stove from pallet onto
your non-combustible surface. Do not operate the
stove while it sits on the pallet.
Notice: Be careful to protect the bottom of the stove
and floor surfaces when moving the stove. Bottom
edges of stove are sharp and can scratch surfaces.
Notice: Clearances may only be reduced by means
approved by the regulatory authority having jurisdiction.
Hearth pad minimum requirements:
2
USA Hearth Pad Requirements
A Sides
B Back
C Front
Canada Hearth Pad Requirements
A Sides
B Back
C Front
Non-combustible floor protection extending beneath the flue pipe is required
with horizontal venting or under the top vent adapter with vertical installation.
*Non-combustible floor protection must extend 2 inches (51mm) beneath the
flue pipe when installed horizontal venting or under the top vent adapter with
vertical installation. CANADA REQUIRED, USA RECOMMENDED.
Confirm required clearances to combustibles:
3
Vertical Installations (Interior Flue)
Straight back against wall
D Back wall to pellet pipe
E Side wall to stove
Corner Installation
Straight back against wall
F Walls to stove
Horizontal Installations
Straight back against wall
G Back wall to stove
E Side wall to stove
H Clearance to top of stove
J Clearance to front of stove
pelprostoves.com
Inches mm
2 51
2 51
6 152
Inches mm
8 203
2 51
6 152
Inches mm
3 76
13 330
Inches mm
3 76
Inches mm
2 51
13 330
7 178
48 1219
PelPro Cast Pellet Stove • 7093-600 • 07/13/16
1
2
B*
A A
C
3
D
G
E
J
F
J
H
J
F
9