Convection Blower - Pelpro PPC90 User Manual

Maintaining Your Stove
Pro Tip
The type of fuel you are burning will dictate how often you have to clean your firepot.
If the fuel you are burning has a high dirt or ash content, it may be necessary to clean the
firepot more than once a day.
Poor quality fuel will cause clinkers to form in the firepot. Clinkers are formed when dirt, ash
or a non-burnable substance is heated to 2000 deg. F (1093 deg. C) and becomes glass-
like.
Always burn dry fuel. Burning fuel with high moisture content take heat from the fuel and
tends to cool the appliance, robbing heat from your home.
Damp pellet fuel can clog the feed system.
CAUTION!
Handle glass assembly with care and refer to maintenance instructions. When cleaning glass:
• Avoid striking, scratching or slamming glass.
• Do NOT clean glass when hot
• Do NOT use abrasive cleaners
• Do NOT operate with glass cracked, broken or scratched
WARNING!
Glass is 5mm thick high temperature heat resistant ceramic glass.
• DO NOT REPLACE with any other material
• Alternate material may shatter and cause injury
Zone 2 - Stove Body
MONTHLY OR

Convection Blower

• Remove right side panel to access and
remove convection blower
• Vacuum any debris from the fan blades and
blower housing
Hopper
• Empty hopper of any pellets
• Vacuum any remaining pellets/debris from the
hopper
20
AS NEEDED
PelPro Cast Pellet Stove • 7093-600 • 07/13/16
Zone Zone
1 1
Zone Zone
2 2
pelprostoves.com
Zone Zone
3 3