Starting Your Stove; What To Expect - Pelpro PPC90 User Manual

Using Your Stove
Starting your stove the first time

What to Expect

Combustion blower will turn on
1
Igniter will turn on
2
Pellets will drop, smoke may occur in firebox but will
3
evacuate, and flame will appear in firepot.
Convection blower will automatically turn on after the
4
stove heats up. Convection blower will continue to
run even after your stove has been shut down.
Pro Tips
• Odors and vapors are released during initial startup after purchase; burning your stove on
HI for 30 minutes will allow the paint to cure. Open windows or doors for air circulation until
burn off is complete.
• During start up and normal operation your stove's front door must be closed
• Priming is only required the first time your stove is lit, or after a FUEL FEED ALARM.
WARNING!
Fire Risk
Keep combustible materials, gasoline and other flammable vapors and liquids clear of appliance.
• Do NOT operate appliance with door open
• Do NOT operate appliance with firepot floor open
• Do NOT store flammable materials in the appliance's vicinity
• Do NOT use gasoline, lantern fuel, kerosene, charcoal lighter fluid or similar liquids or gels to start or
"freshen up" a fire in this heater
Keep all such liquids well away from the heater while it is in use as combustible materials may ignite.
HOT SURFACES!
Hot glass will cause burns.
• Do not touch glass until it is cooled
• NEVER allow children to touch glass
• Keep children away
• CAREFULLY SUPERVISE children in same room as fireplace
• Alert children and adults to hazards of high temperatures
• High temperatures may ignite clothing or other flammable materials
• Keep clothing, furniture, draperies and other flammable materials away
14
WARNING!
Glass and other surfaces are hot during operation AND cool down.
PelPro Cast Pellet Stove • 7093-600 • 07/13/16
4
1
3
2
pelprostoves.com