Pelpro PP60 Recommended Repair Procedures

ALARM CODE
1 FLASH: EMPTY HOPPER.........................................................................(PAGE
2 FLASHES: EXHAUST PROBE
3 FLASHES: AMBIENT PROBE
4 FLASHES: MISSED
8 FLASHES: EXHAUST OVER
SYMPTOM
NOT FEEDING PELLETS:...........................................................................(PAGE 11)
NOT LIGHTING THE
LAZY OR SOOTY FLAMES:.........................................................................(PAGE 4)
NO POWER:.................................................................................................(PAGE 12)
CONVECTION BLOWER NOT COMING
EXHAUST BLOWER NOT COMING ON:....................................................
UNIT IS NOT SENSING TEMP IN THE
REFER TO THE OWNERS MANUAL FOR INFORMATION ON MAKING ADJUSTMENTS
TO THE UNIT OR FOR THE PROCEDURES FOR REPLACING PARTS.
ALWAYS UNPLUG THE STOVE BEFORE CLEANING, REPLACING
COMPONENTS, RESETING SNAP DISCS AND CHECKING WIRE
PP60 PELLET STOVE
Recommended Repair Procedures
FAIL........................................................(PAGE
ALARM....................................................(PAGE
IGNITION.................................................................(PAGE 6)
TEMPERATURE........................................(PAGE 3)
FUEL:.........................................................................(PAGE 9)
ON:..............................................(PAGE 2)
ROOM:...........................................(PAGE 7)
CONNECTIONS.
August 5th, 2013
WARNING!
REPAIR PROCEDURE
5)
8)
7)
(PAGE 10)