Remove And Install Seats - Victory Motorcycles V92C Owner's Manual

Maintenance

Remove and Install Seats

The V92C Standard and Deluxe Cruiser have two separate seats - - the operator's seat and the passenger's seat.
WARNING
Always make sure the seats are securely locked before riding the motorcycle. An unlocked seat
could cause a sudden shift in riding position, causing you to lose control of the motorcycle.
1. Insert the ignition key into the ignition switch/seat release and turn the key counterclockwise.
2. Lift the front of the seat and slide the seat forward and off of the motorcycle.
3. The passenger's seat mounting screws are located under the rear fender. Removing the passenger seat
is unnecessary for regular maintenance.
4. To reinstall the operator's seat, slide the tongue of the seat into the passenger's seat base. Push down
on the front of the operator's seat until it locks.
104