Preparing For Storage; Clean And Protect The Motorcycle; Stabilize Fuel - Victory Motorcycles V92C Owner's Manual

This section includes instructions for preparing the motorcycle for storage, maintaining it during storage, and
removing it from storage.

Preparing for Storage

Choose an adequate storage location
Choose a dry, well- -ventilated storage location, inside a garage or other structure if possible. The location
should have a firm, flat surface and allow enough space for the motorcycle.
To best preserve tire condition:
The storage area should have a relatively constant and moderate temperature.
S
The motorcycle should not be near a radiator or other heat source, or any type of electric motor.
S
The storage surface should be free of oil and gasoline.
S

Clean and Protect the Motorcycle

To prepare the motorcycle for storage, begin by cleaning it (see "Cleaning," page 113). Wax painted surfaces
and polish chromed surfaces. Apply protectant to exposed rubber, vinyl, and plastic parts.

Stabilize Fuel

1. Using a mixture of fuel and the amount of gasoline stabilizer recommended by the stabilizer
manufacturer, fill the fuel tank only to the top of the filler insert.
2. Start and run the engine for 15 minutes to pass the stabilized fuel through entire fuel- -injection
system.
Cleaning and Storage
119