Programming (Mod.sde); Selecting The Display Language - Rancilio classe 10 Use And Maintenance

9.2. Programming (Mod.SDE)

Programming Panel
This panel features 4 buttons with the following
functions:
- Button with "+" sign
in the programming menus. Or to increase the
value
- Button with "-" sign
programming menus. Or to decrease the value
- Button with "enter" sign
gramming menu. Or to confirm entries
- Button with "esc" sign
Or to quit programming mode.
When the "+" and " – "buttons are pressed for appro-
ximately 2 seconds, the "bartender" programming
menu is activated. This menu contains the following
submenus:
LANGUAGE
REGENERATION
SELECTION
To move from one submenu to another, press "+" or
"-". To enter in a submenu, press "enter", while to
quit, press "esc".
When you enter a submenu, the display flashes the
editable value. To make changes, use the "+" or "-"
buttons.
9.2.1.

Selecting the Display Language

This menu allows you to select the language
to be used to show and messages on the
display. You can select among the following
languages: Italian, English, Spanish, French,
German and Portuguese.
LANGUAGE
SELECTION
ITALIANO
ENGLISH
ESPANOL
FRANCAIS
DEUTSCH
To move to a higher level
To move to a lower level in the
SELEZIONE
LINGUA
To enter the pro-
To quit the menu
BEEP
RESET
REGENERATION SELEZIONE
BEEP
LINGUA
RESET
ITALIANO
ENGLISH
ESPANOL
FRANCAIS
DEUTSCH
PORTUGUES
Language selection
- Softener regeneration
- Beep
- Clock
RESET
BEEP
RIGENER.
- Set clock
SUI TASTI
RESINE
- Date-time format
- Set timer
- Automatic switching ON
- Selection counts
- Coffee group 1
- Coffee group 2
- Coffee group 3
- Coffee group 4
- Water group
- TSC group
- Counter total
- Reset counters
CLOCK SET TIMER
If you make changes, these must be confirmed by
pressing "enter" until you quit the submenu. If you do
not wish to save your changes, press "esc".
RESET
BEEP
RIGENER. OROLOGIO
CLOCK SUI TASTI SET TIMER
RESINE
-
OROLOGIO SET TIMER
SELECTION
COUNTER
CONTATORI
SELECTION
SET TIMER
PARZIALI
COUNTER
73
CONTATO
PARZIA