Brother DCP-9010CN Network User's Manual page 46

Configuring your machine for a wireless network (For MFC-9320CW)
For example:
Network name:(SSID, ESSID)
HELLO
Communication Mode
Infrastructure
b
Plug the machine's power cord into the AC power outlet. Turn on the machine's power switch.
c
Press Menu on the control panel of the Brother machine.
d
Press a or b to choose Network.
Press OK.
Select ab or OK
7.Network
e
Press a or b to choose WLAN.
Press OK.
Network
2.WLAN
f
Press a or b to choose Setup Wizard.
Press OK.
WLAN
2.Setup Wizard
g
If the following message appears, press 1 to choose On. The wired network interface will become
inactive with this setting.
WLAN Enable ?
1.On 2.Off
h
The machine will search for your network and display a list of available SSIDs. You should see the SSID
you wrote down earlier. If the machine finds more than one network use a or b key to choose your
network, then press OK. Go to l.
If your access point is set to not broadcast the SSID, you will have to manually add the SSID name. Go to i.
i
Choose <New SSID> using a or b.
Press OK. Go to j.
Select SSID&Set
<New SSID>
j
Enter a new SSID. (For information how to type text, see Entering Text on page 189.)
Press OK.
SSID:
Authentication method
WPA2-PSK
Encryption mode
AES
Network key
12345678
35
3