How To Set A New Default For Scan To E-Mail (E-Mail Server) (For Mfc-9120Cn And Mfc-9320Cw: Available As A Download) - Brother DCP-9010CN Network User's Manual

Control panel setup
Relay Report
A Relay Broadcast Report can be printed at the machine that will act as a Relay Station for all Relay
Broadcasts.
Its primary function is to print reports of any relayed broadcasts that have been sent through the machine.
Please note: In order to use this function, you must assign the relay domain in the "Trusted Domains" section
of the Relay function settings.
a
Press Menu.
b
Press a or b to choose Network.
Press OK.
c
Press a or b to choose E-mail/IFAX.
Press OK.
d
Press a or b to choose Setup Relay.
Press OK.
e
Press a or b to choose Relay Report.
Press OK.
f
Press a or b to choose On or Off.
Press OK.
g
Press Stop/Exit.
Note
For more information on Relay Broadcast, see Relay broadcast from a computer on page 117.
How to set a new default for Scan to E-mail (E-mail server)
(For MFC-9120CN and MFC-9320CW: available as a download)
You can choose the default color file type for the Scan to E-mail (E-mail server) function. (For the details on
how to operate Scan to E-mail (E-mail server), see Internet fax and Scan to E-mail (E-mail server) (For
MFC-9120CN and MFC-9320CW) on page 112.)
Note
In order to use this function, please download the necessary software from the download page in the
Brother Solution Center. (http://solutions.brother.com/)
a
Press Menu.
b
Press a or b to choose Network.
Press OK.
c
Press a or b to choose Scan To E-mail.
Press OK.
6
6
6
74