Using The Control Panel To Change The Print Server Settings; Using Web Based Management (Web Browser) To Change The Print/Scan Server Settings - Brother DCP-9010CN Network User's Manual

Configuring your machine for a network
a
Start the BRAdmin Professional utility (from Windows
®
Windows Server 2003/2008), by clicking Start / All Programs
Brother BRAdmin Professional 3 / BRAdmin Professional 3.
1
Programs for Windows
b
Choose the print server which you want to configure.
c
Choose Configure Device from the Control menu.
d
Enter a password if you have set one. The default password is "access".
e
You can now change the print server settings.
Note
• If the print server is set to its factory default settings without using a DHCP/BOOTP/RARP server, the
device will appear as APIPA in the BRAdmin Professional 3 utility screen.
• You can find the node name and MAC Address / Ethernet Address by printing out the Network
Configuration List. (See Printing the Network Configuration List on page 80 for information on how to print
the Network Configuration List on your print server.)

Using the control panel to change the print server settings

You can configure and change the print server settings using the control panel Network menu.
See Control panel setup on page 52.
Using Web Based Management (web browser) to change the print/scan server
settings
A standard web browser can be used to change your print server settings using the HTTP (Hyper Text
Transfer Protocol). (See How to configure the machine settings using Web Based Management (web
browser) on page 102.)
®
2000 users
®
2000/XP, Windows Vista
1
/ Brother Administrator Utilities /
® ®
, Windows 7 and
2
2
19
2