Brother DCP-9010CN Network User's Manual page 166

Troubleshooting
®
Windows 7 users:
a
Click the button, Control Panel, System and Security and then Windows Firewall.
Make sure the Windows Firewall state is set to On.
b
Click Advanced settings. The Windows Firewall with Advanced Security window appears.
c
Click Inbound Rules.
d
Click New Rule.
e
Choose Port and click Next.
f
To add a port enter the information below:
 For network scanning
Choose UDP and enter "54925" in the Specific local ports:.
Click Next.
 For network PC-Fax
Choose UDP and enter "54926" in the Specific local ports:.
Click Next.
g
Choose Allow the connection and click Next.
h
Check the applicable items and click Next.
i
Enter any description in Name: (for example "Brother Scanner" or "Brother PC-Fax") and click Finish.
j
Make sure that the new setting is added and is checked.
k
Click Outbound Rules.
l
Click New Rule.
m
Choose Port and click Next.
n
To add port enter the information below:
 For network scanning
Choose UDP and enter "54925" in the Specific remote ports:.
Click Next.
 For network PC-Fax
Choose UDP and enter "54926" in the Specific remote ports:.
Click Next.
o
Choose Allow the connection and click Next.
p
Check the applicable items and click Next.
q
Enter any description in Name: (for example "Brother Scanner" or "Brother PC-Fax") and click Finish.
r
Make sure that the new setting is added and is checked.
14
14
155