Innova 3040c Owner's Manual page 66

Live Data Mode
CUSTOMIZING LIVE DATA (PIDs)
2. Use the UP
as necessary, to highlight Custom Live
Data, then press the ENTER
If the Scan Tool fails to establish
communication with the vehicle, a
"Communication Error" message is
shown on the Scan Tool's display.
- Ensure your vehicle is OBD2
compliant.
COVERED on page 4 for vehicle
compliance verification information.
- Verify the connection at the DLC,
and verify the ignition is ON.
- Turn the ignition OFF, wait 5
seconds, then back ON to reset
the computer.
- Press the ENTER
continue.
If Live Data is not supported by the
vehicle under test, an advisory
message displays. Press the M
button to return to the Main Menu.
Live Data is not available for your
vehicle.
If custom Live Data was previously
selected, the Select PIDs to Use
screen displays.
- To use the existing custom Live data selections, use the UP
and DOWN
existing PIDs, then press the ENTER
step 5.
- To select new custom Live Data, use the UP
buttons, as necessary, to highlight Select new PIDs, then
press the ENTER
displays, with the first PID in the menu highlighted. Proceed to
step 3.
If custom Live Data was not previously selected, the Custom
Live Data menu displays, with the first PID in the menu
highlighted. Proceed to step 3.
64
and DOWN buttons,
button.
See VEHICLES
button to
buttons, as necessary, to highlight Use
button. The Custom Live Data menu
button. Proceed to
and DOWN
3040c