Customizing Live Data (Pids) - Innova 3040c Owner's Manual

If Live Data is not supported by the
vehicle under test, an advisory
message displays. Press the M
button to return to the Main Menu.
Live Data is not available for your
vehicle.
Remember, what you are viewing is
"real-time" Live Data. The values (volts, rpm, temperature, vehicle
speed, system status etc) for the various PIDS displayed may
change as the vehicle's operating conditions change.
4. A vehicle usually supports several PIDs, however, only a limited
amount of PID data can be displayed on the screen at one time. If
additional PID data is available, a small arrow will be shown on the
display. Use the UP
scroll up or down to view all available PID data.
If communication with the vehicle is
lost while viewing Live Data, a
Communication
shows on the Scan Tool's display.
5. Press and hold the ENTER
view the "expanded" definition for the
currently selected PID. Release the
ENTER
6. If you experience vehicle problems, view
and/or compare the Live Data (PID)
information displayed on the Scan Tool
to specifications in the vehicle's repair
manual.
If desired, you can "customize" the
Live Data display to show only those
PIDs you are interested in viewing.
See Customizing Live Data (PIDs)
below for details.

CUSTOMIZING LIVE DATA (PIDs)

This feature lets you customize the Scan Tool display to show only
those PIDs that are of interest at the current time. You can customize
the Live Data display by placing the Scan Tool in "Custom Live Data"
mode and selecting only the PIDs that you wish to display. To customize
the Live Data display, proceed as follows:
1. With the Scan Tool in Live Data mode (see VIEWING LIVE DATA
on page 62), press and hold the LD button until the Live Data Menu
displays, then release the LD button.
3040c
and DOWN
Lost"
button to return to the PID list.
Live Data Mode
CUSTOMIZING LIVE DATA (PIDs)
buttons, as necessary, to
message
button to
63