Innova 3040c Owner's Manual page 51

Reading ABS DTCs
1. From the OBD2 DTC screen or OEM
enhanced DTC screen, press the ABS
button.
2. A "One moment please" message
displays while the Scan Tool retrieves
the selected DTCs.
If the vehicle does not support ABS
communication, an advisory message
shows on the Scan Tool's display.
Press the M button to return to the
Main Menu.
If the Scan Tool fails to link to the
vehicle's computer, a "Linking Failed"
message shows on the Scan Tool's
display.
- Verify the connection at the DLC,
and verify the ignition is ON.
- Turn the ignition OFF, wait 5
seconds, then turn back ON to
reset the computer.
- Press the ENTER
If the Scan Tool cannot link to the
vehicle's
attempts, the message "Contact
Technical Support" displays.
- Press the M button to return to the
Main Menu.
- Turn the ignition off, and dis-
connect the Scan Tool.
- Contact Technical Support for assistance.
3. To read the display:
Refer to DISPLAY FUNCTIONS on page 6 for a description of
LCD display elements.
A visible
diagnostic tool is being powered
through the vehicle's DLC connector.
A visible
diagnostic
(communicating with) the vehicle's
computer.
The display shows the number of
the code currently being displayed,
the total number of codes retrieved.
3040c
button to continue.
computer after
icon indicates that the
icon indicates that the
tool is linked
Using the Scan Tool
VIEWING ABS DTCs
three
to
49