Innova 3040c Owner's Manual page 44

Using the Scan Tool
VIEWING ENHANCED DTCs
If the Scan Tool cannot link to the
vehicle's
attempts, the message "Contact
Technical Support" displays.
- Press the M button to return to the
Main Menu.
- Turn the ignition off, and dis-
connect the Scan Tool.
- Contact Technical Support for
assistance.
If the KOER Test was selected, and
the vehicle's engine is not running,
an advisory message shows on the
Scan Tool's display.
- Press the M button to return to the
Main Menu.
If the KOEO Test was selected, and
the vehicle's engine is running, an
advisory message shows on the
Scan Tool's display.
- Press the M button to return to
the Main Menu.
4. If the KOER test was selected, an
"instructional" message shows on the
Scan Tool's display.
Turn the steering wheel to the right,
then release.
Press and release the brake pedal.
Cycle
equipped).
A "One moment please" message displays while the test is in
progress.
5. To read the display:
Refer to DISPLAY FUNCTIONS on page 6 for a description of
LCD display elements.
A visible
through the vehicle's DLC connector.
A visible
Scan Tool is linked to (communica-
ting with) the vehicle's computer.
The display shows the number of
the code currently being displayed,
the total number of codes retrieved.
42
computer after
the overdrive switch
icon indicates that the Scan Tool is being powered
icon indicates that the
three
(if
3040c