Innova 3040c Owner's Manual page 49

To exit the enhanced mode, press the M button to return to the
Main Menu. Use the UP
necessary, to highlight Global OBD, then press the ENTER
button to return to the Global OBD2 mode.
Toyota/Lexus Enhanced DTCs
When OEM Enhanced is chosen from the
Main Menu, (and Toyota is selected when
prompted), the Scan Tool retrieves OEM
enhanced DTCs from the vehicle's com-
puter.
1. A "One moment please" message
displays, while the Scan Tool retrieves
the selected DTCs.
If the Scan Tool fails to link to the
vehicle's computer, a "Communica-
tion Error" message shows on the
Scan Tool's display.
- Ensure your vehicle is OBD2
compliant.
COVERED on page 4 for vehicle
compliance verification information.
- Verify the connection at the DLC, and verify the ignition is ON.
- Turn the ignition OFF, wait 5 seconds, then back ON to reset
the computer.
- Press the ENTER
If the Scan Tool cannot link to the
vehicle's
attempts, the message "Contact
Technical Support" displays.
- Press the M button to return to the
Main Menu.
- Turn the ignition off, and discon-
nect the Scan Tool.
- Contact Technical Support for assistance.
2. To read the display:
Refer to DISPLAY FUNCTIONS on page 6 for a description of
LCD display elements.
A visible
through the vehicle's DLC connector.
A visible
(communicating with) the vehicle's computer.
3040c
See VEHICLES
button to continue.
computer after
icon indicates that the Scan Tool is being powered
icon indicates that the Scan Tool is linked to
Using the Scan Tool
VIEWING ENHANCED DTCs
and DOWN
three
buttons, as
47