Special Printing; Specifying Output Color For Printing In A Pcl Driver; Printing With Black - Xerox DocuColor 1632 Printing User Manual
Hide thumbs
Also See for DocuColor 1632:
- Service manual (1064 pages) ,
- User manual (112 pages) ,
- Safety notes (15 pages)
Table of Contents
Advertisement
U
G
( P
)
S E R
U I D E
R I N T
Specifying Output Color for Printing in a PCL Driver
Printing with Black
2 – 8 0
C. Special Printing
You can specify the output color for printing.
From the Output Color menu of either the Paper/Output or
Graphics tab, select Black or Auto.
To print in black and white, select Black from the Output Color
menu.
Print Mode
Specify whether to give priority to the print speed or the image
quality. The printer/copier is capable of printing at three different
resolutions:
High Speed: 600 x 600
Standard: 1200 x 600
High Quality: 1200 x 1200
To change resolution settings, use the Print Mode selections.
NOTE:
The Image Enhancement feature is not available when
Standard or High Quality is selected.
Options
High Speed
Standard
High Quality
NOTE:
If printing is slow even when High Speed has been
selected, try setting Print Page Mode on the Configuration tab to
On. The printing time may be shortened.
Contents
Prints faster but with a loss of image
quality.
The average mode of High Speed and
High Quality.
Prints with better quality but slower
Advertisement
Table of Contents
