Xerox DocuColor 1632 Printing User Manual page 60

U G ( P )
S E R U I D E R I N T
Draft Mode
Gray Guaranteed
Stapling
Custom Paper Image
Rotation
Substitute Tray
2 – 5 4
Specify whether to reduce the amount of toner used when printing
drafts. When you select On, the overall printed color becomes
lighter. This is best for printing documents when print quality is not
necessary.
Select On to print grays and black within documents in black toner
only. This prevents neutral grays from exhibiting any kind of color
shading or misregistration. This feature does not apply to images
of the documents.
NOTE: For documents containing sweeps/gradients that include
gray, it may be preferable to set this feature to Off.
Select whether to staple printed documents as well as the position
of the staple.
• You can staple 2 to 50 sheets.
• You can only staple when Finisher Tray is selected for
Output Destination in the Advanced Options tab.
• You cannot use staples when Job Offset is selected.
Select whether to correct the paper orientation when printing on
custom paper. When printing on custom paper, select On to
correct the orientation rotated at 90 degrees.
Specify what action to take when the paper size called for is not
loaded in the machine.
Use Printer Settings: The settings can be confirmed on the
printer control panel.
Display message: Display paper supply messages on the printer
control panel. Printer will be unavailable until paper is supplied.
Use Nearest Size (With Zoom): Select the nearest paper size.
Automatically reduces or enlarges images for printing, as
necessary.
Use Nearest Size (No Zoom): Select the nearest paper size
available and prints in equal size.
Use Larger Size (With Zoom): Print in equal size on paper larger
than the original. Automatically reduces images for printing, as
necessary.
Use Larger Size (No Zoom): Print on paper larger than the
original.