History Mode; Alarm Mode; High Alarm Mode - Ambient Weather WS-1075 User Manual

Relative and Absolute Pressure Display. Press the
pressure will begin flashing. Press the + key to alternate the display between absolute and relative
pressure.
Average Wind Speed and Gust. Press the
speed will begin flashing. Press the + key to alternate the display between the 48 second Wind
Average Speed and Gust Speed (or the maximum wind speed in the update period, which is 48
seconds).
1. Rain Increment Display. Press the
will begin flashing. Press the + key to alternate the display between the 1 hour rain, 24 hour
rain, weekly rain, monthly rain, and total rain (since reset).
2. Total Rain Reset. With the total rain selected and flashing in the previous step, press and
key for three seconds, and the total rain will reset to zero. (Note – the total rain
hold the
SET
must be displayed in the previous step to reset the total rain). Note: if the total rain incrment
is not displayed, this function will not work.

8.3 History Mode

While in the Normal mode, press the
Select the + key to review historical data archived in the console in increments of three hours (-24, -21,
-18, -15, -12, -9, -6, and -3 hours).
Note: Rain is not included in the history mode since incremental rain (hourly, 24 hour, monthly,
weekly, and total) are already provided.

8.4 Alarm Mode

Note: After initially pressing the
alarm values. The alarm value will be displayed only for those already activated, otherwise, inactive
alarms will show dashes (--).
The Alarm mode can be exited at any time by either pressing the
10-second time-out to take effect.

8.4.1 High Alarm Mode

While in the Normal mode, press the
will be displayed in the TIME section.
1. Time of Day Alarm. Press the
flashing. Press the + key (increase) or MIN/MAX key (decrease) to change the hour value.
Press the SET key again to set the minute value. The minute will begin flashing. Press the
+ key or MIN/MAX key to increase or decrease the minute value.
Version 1.1 ©Copyright 2012, Ambient LLC. All Rights Reserved.
8.2.2.2 Relative and Absolute Pressure Display
8.2.2.3 Average Wind Speed and Wind Gust
SET
8.2.2.4 Rain Display and Reset
SET
HISTORY key to enter the History mode.
ALARM key, the display will show the current high and low
key to enter the High Alarm mode. The HIAL icon
ALARM
SET key to set the hour of day alarm. The hour will begin
key to change the pressure display. The
SET
key to change the wind speed display. The wind
key to change the rain increment display. The rain
ALARM
key or waiting for the
Page 18