Sensor Search Mode; History Graph Mode; Reset Min/Max Record - Ambient Weather WS-110 User Manual

Wireless 8 channel advanced weather station with temperature spectrum color changing backlight
Table of Contents

Advertisement

Note: Reference Section 7.2 Personalizing Color Ranges to modify the color changes to best
suit your comfort level and location.
12. Backlight Contrast: Press the SET key again to change the backlight brightness (the
BRIGHT icon will be displayed). Press the [+] key or [-] key to adjust the backlight
contrast from 1 (dim) to 8 (bright).
5.3 Chanel Selection
Press the CHANNEL/+ button to switch the display between remote sensors 1 through 8, and
scroll mode
. In scroll mode, all of the indoor and detected outdoor sensors will be displayed
in five second intervals.

5.4 Sensor Search Mode

If any of the sensor communication is lost, dashes (--.-) will be displayed on the screen. To
reacquire the signal:
1. If a specific channel is lost, press the CH/+ button to display this channel, then Press and
hold the CH/+ button for 3 seconds, and the remote search icon
displayed for up to 3 minutes. Once the signal is reacquired, the remote search icon
will turn off, and the current values will be displayed.
2. If new sensors are added, subtracted, or multiple sensor channels are lost, Press and hold
the CH/+ button for 5 seconds (on any channel), and the remote search icon
constantly displayed for up to 10 minutes. Once the signal is reacquired, the remote
search icon

5.5 History Graph Mode

The historical graph on the display can be changed to display any of the measured parameters.
In normal mode, press the HISTORY/- key to toggle between:
the barometer graph (the BAROREL icon is displayed),
indoor temperature graph (the TEMP-IN icon is displayed)
indoor humidity graph (the HUMI-IN icon is displayed)
outdoor temperature graph (the TEMPOUT icon is displayed)
outdoor humidity graph (the HUMIOUT icon is displayed)

5.6 Reset Min/Max record

If you own more than one remote sensor, press the CHANNEL/+ button first to display the
specific channel you wish to clear.
In normal mode press and hold the HISTORY/- key for 3 seconds, and the maximum values will
Version 1.1
©Copyright 2014, Ambient LLC. All Rights Reserved.
will turn off, and the current values will be displayed.
will be constantly
will be
13
Page

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents