Handlebar Switches - Yamaha BANSHEE 350 YFZ350A Owner's Manual

EBU18061

Handlebar switches

2
1. Light switch " / /OFF"
2. Engine stop switch " /
EBU18080
Engine stop switch "
Set this switch to " " before starting the engine.
The engine stop switch controls the ignition and
stops the engine when it is running. Use this switch
to stop the engine in an emergency situation. The
engine will not start or run when this switch is set
to " ".
1
"
/ "
EBU29780
Light switch "
Set this switch to "
and the taillight. Set the switch to "
the high beams and the taillight. Set the switch to
"OFF" to turn off all the lights.
EBU18282
Throttle lever
Once the engine is running, pushing the throttle le-
ver will increase the engine speed.
Regulate the speed of the ATV by varying the
throttle position. Because the throttle is spring-
loaded, the ATV will decelerate, and the engine will
return to an idle any time the throttle lever is re-
leased.
4-2
/ /OFF"
" to turn on the low beams
" to turn on
1
2
3
4
5
6
7
8
9
10
11