Throttle Lever; Throttle Override System; Speed Limiter - Yamaha BANSHEE 350 YFZ350A Owner's Manual

1
2
3
4
5
6

1. Throttle lever

7
Before starting the engine, check the throttle to be
sure it is operating smoothly. Make sure it returns
8
to the idle position as soon as the lever is released.
9
EBU18300

Throttle OverRide System

10
If during operation, the carburetor or the throttle ca-
ble should malfunction and will not close fully, take
11
your thumb off the throttle lever.
The throttle override system immediately cuts off
the ignition.
1
EWB00260
WARNING
Riding with a malfunction increases the
chance for an accident and injury. Make sure
that the cause of the malfunction is corrected
before restarting the engine or have the ATV in-
spected by a Yamaha dealer.
EBU18323

Speed limiter

Your ATV is equipped with an adjustable speed
limiter. The speed limiter keeps the throttle from
fully opening, even when the throttle lever is
pushed to the maximum.
1. Loosen the locknut.
2. To increase the maximum engine power avail-
able and the maximum speed of the ATV, turn
the adjusting screw in direction (a). To de-
crease the maximum engine power available
and the maximum speed of the ATV, turn the
adjusting screw in direction (b). Do not turn
the adjusting screw out more than 12 mm
(0.47 in) or the throttle cable could be dam-
aged. Always make sure the throttle lever free
play is adjusted to 4.0–6.0 mm (0.16–0.24 in).
(See page 8-34.) WARNING! Improper ad-
4-3