Yamaha BANSHEE 350 YFZ350A Owner's Manual page 40

Spring preload setting:
Minimum (soft):
1
Distance A = 228.5 mm (9.00 in)
Standard:
2
Distance A = 220.5 mm (8.68 in)
Maximum (hard):
3
Distance A = 213.5 mm (8.41 in)
4
3. Tighten the locknut to the specified torque.
NOTICE: Always tighten the locknut
5
against the adjusting nut, and then tighten
it to the specified torque.
6
Tightening torque:
7
Locknut:
54 Nm (5.4 m·kgf, 39 ft·lbf)
8
Rebound damping force
9
Turn the rebound damping force adjusting dial in
10 direction (a) to increase the rebound damping
force and thereby harden the damping, and in di-
11
rection (b) to decrease the rebound damping force
and thereby soften the damping.
[ECB00081]
4-15
(b)
1. Rebound damping force adjusting dial
Rebound damping setting:
Minimum (soft):
20 click(s) in direction (b)*
Standard:
13 click(s) in direction (b)*
Maximum (hard):
3 click(s) in direction (b)*
* With the adjusting dial fully turned in direc-
tion (a)
Compression damping force
Turn the compression damping force adjusting
(a)
1