Yamaha BANSHEE 350 YFZ350A Owner's Manual page 111

1. Pilot air screw
5. Remove the seat. (See page 4-11.)
6. Check the engine idling speed and, if neces-
sary, adjust it to specification by turning the
throttle stop screws at the carburetors. To in-
crease the engine idling speed, turn the throt-
tle stop screws in direction (a), and to
decrease it, turn the screws in direction (b).
1
1. Throttle stop screw
Engine idling speed:
ECB00510
NOTICE
G
The throttle stop screws were preset at the
factory. When adjusting the idling speed,
turn both throttle stop screws the same
amount, otherwise the carburetor synchroni-
zation will be incorrect.
G
Adjusting the pilot air screws and the idling
speed are separate procedures, but they
must be adjusted at the same time to achieve
8-33
(b) (a)
(b)
1450–1550 r/min
1
(a)
1
2
3
4
5
6
7
8
9
10
11