Drive Chain Slack - Yamaha BANSHEE 350 YFZ350A Owner's Manual

EBU24853

Drive chain slack

The drive chain slack should be checked before
each ride and adjusted if necessary.
To check the drive chain slack
1. Place the ATV on a level surface.
TIP
When checking and adjusting the drive chain
slack, there should be no weight on the ATV and
all tires must be touching the ground.
2. Move the ATV back and forth to locate the
tightest portion of the drive chain, and then
measure the drive chain slack as shown.
Drive chain slack:
12.0–18.0 mm (0.47–0.71 in)
1. Drive chain slack
3. If the drive chain slack is incorrect, adjust it as
follows.
To adjust the drive chain slack
1. Place the ATV on a level surface.
2. Loosen the axle holding nuts.
8-43
1
1
2
3
4
5
6
7
8
9
10
11