Handlebar Switches - Yamaha BANSHEE YFZ350M 1999 Owner's Manual

EBU00053

Handlebar switches

w
1. Lights switch "LIGHTS"
2. Engine stop switch "ENG. STOP"
EBU00054
Engine stop switch "ENG. STOP"
Make sure that the engine stop switch is in
the "RUN" position. The engine stop
switch controls ignition and can be used at
all times to stop the engine, especially in
an emergency. The engine will not start or
run when the engine stop switch is turned
to "OFF".
q
EBU00057
Lights switch "LIGHTS"
Turn the switch to "LO" for the low beam
and the taillight. Turn the switch to "HI" for
the high beam and the taillight.
NOTE:
The headlight and taillight can be turned
on only when the engine is started.
4-2