Fuel Gauge; Handlebar Switches - Yamaha Grizzly 450 2010 Owner's Manual

To set the clock
1. Set the display to the clock mode.
2. Push the " / " button until the clock starts
flashing.
3. Set the hours by pushing the "H" button.
4. Set the minutes by pushing the "M" button.
5. Push the " / " button, and then release it to
start the clock.
EBU18050

Fuel gauge

The fuel gauge indicates the amount of fuel in the
fuel tank. When the needle reaches the red line, re-
fill the tank at the first opportunity.
1. Fuel gauge
2. Red line
TIP
If the ATV runs out of fuel, move the fuel cock lever
to the "RES" position. Approximately 4.5 L (1.19
US gal, 0.99 Imp.gal) of fuel will be remaining in
the tank.
EBU18061

Handlebar switches

1. Light switch " /
2. Start switch " "
3. Engine stop switch "
4. Override switch "OVERRIDE"
5. Horn switch " "
4-6
/OFF"
/ "
4