Removing And Installing The Cowlings And Panel - Yamaha YZF-R15A Owner's Manual

PERIODIC MAINTENANCE AND ADJUSTMENT
Removing and installing the
cowlings and panel
1. Cowling A
2. Cowling B
3. Panel A
4. Panel B
7
The cowlings and panel shown need
to be removed to perform some of the
maintenance jobs described in this
chapter. Refer to this section each
time a cowling or panel needs to be re-
moved and installed.
EAU18731
Cowling A
1. Screw
2. Cowling A
To remove the cowling
1. Remove panel A.
2. Remove the screws, pull the
cowling outward, and then take it
off.
3. Disconnect the turn signal light
lead coupler.
To install the cowling
1. Connect the turn signal light lead
coupler.
2. Fit the projection on the cowling
EAUE0430
3. Install the screws.
4. Install the panel.
Cowling B
1. Screw
2. Cowling B
To remove the cowling
1. Remove cowling A and panel A.
2. Remove the screws, and then pull
7-6
into the hole, and then push the
cowling inward.
the cowling off.
EAUE0370