Miele CM6x10 Operating Instructions Manual page 67

Message
F73 or
Check the brew unit
Cause and remedy
The brew unit cannot be positioned correctly.
 Switch the coffee machine off with the On/Off
sensor .
 Remove and clean the brew unit (see "Cleaning
and care – Brew unit").
 Push the coffee ejector of the brew unit into the
correct position (see diagram).
 Do not insert the brew unit. Close the machine and
switch it on with the On/Off  sensor.
This will initialise the brew unit motor and put it back
into the start position.
 When
Insert the brew unit
open the machine and put the brew unit back in
the machine. Then close the machine.
Problem solving guide
appears in the display,
67