Rinsing The Milk Pipework - Miele CM6x10 Operating Instructions Manual

Rinsing the milk pipework

Milk residue can clog up the milk pipes
and so the milk pipework should be
rinsed regularly. If a drink has been
made using milk, the prompt to insert
the end of the milk tube into the drip
tray will appear at the latest when you
switch the machine off.
You can also rinse the milk pipework
manually.
 Touch .
 Select
Maintenance
 Select
Rinse milk pipework
touch OK.
 When prompted, place the end of the
milk tube into the right-hand aperture
in the drip tray.
 Touch OK.
The milk pipework will now be rinsed.
and touch OK.
and
Cleaning and care
Cleaning the milk pipework
using the cleaning programme
We recommend using Miele milk
pipework cleaning agent for cleaning
the milk pipework. This has been
specially developed for use with Miele
coffee machines and prevents
subsequent damage.
The milk pipework cleaning agent is
available to order from Miele or via the
internet at www.miele-shop.com.
The Clean milk pipework
programme lasts for approx.
15 minutes.
 Touch .
 Select
Maintenance
The cleaning process cannot be
cancelled once it has started. The
process has to be completed
through to the end.
 Select
Clean milk pipework
touch OK.
The process will start.
 Follow the instructions in the display.
Place milk pipe in cleaning agent
appear in the display.
Preparing the cleaning solution:
 Dissolve the powder in a container
with 200 ml of lukewarm water. Stir
the solution with a spoon until it has
fully dissolved.
maintenance
and touch OK.
and
will
61