Selecting A Profile; Changing The Name; Deleting A Profile; Changing A Profile - Miele CM6x10 Operating Instructions Manual

Selecting a profile

This option is only possible if a profile
has been allocated in addition to the
Miele standard profile.
 Select
Select profile
sensors  and touch OK.
 Select the profile with the arrow
sensor  and touch OK.
The name of the current profile is
shown in the top left of the display.

Changing the name

This option is only possible if a profile
has been allocated in addition to the
Miele standard profile.
 Select
Change name
sensors  and touch OK.
 Now proceed as described in
"Creating a profile":
– Select  to delete a character,
– To enter new characters, highlight the
relevant character and confirm with
OK,
– Save the new name by selecting  in
the display and touching OK.

Deleting a profile

This option is only possible if a profile
has been allocated in addition to the
Miele standard profile.
 Select
Delete profile
sensors  and touch OK.
 Select the profile you wish to delete.
 Touch OK.
with the arrow
with the arrow
with the arrow
A tick  will appear beside the profile
and after a short while the profile will be
deleted.

Changing a profile

You can programme the coffee machine
so that it changes back to the Miele
profile automatically after each drink
has been dispensed, so that the Miele
profile is always active when the
machine is switched on or so that it
retains the most recently selected
profile.
 Select
Change profile
OK.
You now have the following options:
– : The currently selected
Manually
profile will remain active until you
select another profile.
– After each use : The machine will
change back to the Miele profile
automatically after a drink is
dispensed.
– When switched on
machine is switched on it will
automatically select the Miele profile
regardless of which profile was
selected before the machine was last
switched off.
 Select the required option and touch
OK.
Profiles
and then touch
: Each time the
41