Adding Pptp Server - LevelOne FBR-2000 User Manual

the PPTP server.
 Auto-Disconnect if idle
the PPTP Server when there is no activity for a predetermined period of time.
To keep the line always connected, set the number to 0.
 Schedule：Click the down arrow to select the schedule, which was
pre-determined in Schedule. Refer to the corresponding section for details.
Step 4.
Click OK to save modifications or click Cancel to cancel modifications

Adding PPTP Server

Step 1.
Select VPNPPTP Server. Click NewEntry.
Step 2.
Enter appropriate settings in the following window.

User name: Specify the PPTP client. This should be unique.

Password: Specify the PPTP client password.

Remote Client：
 Single Machine: Check to connect to single computer.
 Multi-Machine: Check to allow multiple computers connected to the PPTP
server.

Client IP assigned by：
1. IP Range: check to enable auto-allocating IP for PPTP client to connect.
2. Fixed IP: check and enter a fixed IP for PPTP client to connect.
minutes: Configure this device to disconnect to
IP Address: Enter the PPTP Client IP address.
Netmask: Enter the PPTP Client Sub net mask.
- 220 -