Incoming
This chapter describes steps to create policies for packets and services from the WAN 1/2
network to the LAN network including Mapped IP and Virtual Server.
Enter Incoming window
Step 1:
Click Incoming under the Policy menu to enter the Incoming window. The
Incoming table will display current defined policies from the WAN 1/2 network to
assigned Mapped IP or Virtual Server.
Step 2: The fields of the Incoming window are:
Source: source networks which are specified in the WAN section of the Address
menu, or all the WAN network addresses.
Destination: destination networks, which are IP Mapping addresses or Virtual server
- 239 -