are allowed to pass from the DMZl network to the WAN network. Choose ANY for all
services. To add or modify these services, please go to the Service menu.
Action: Select Permit or Deny from the drop down list to allow or reject the packets travelling
from the specified DMZ network to the WAN network.
Logging: Select Enable to enable flow monitoring.
Statistics: Select Enable to enable flow statistics.
Content Filtering: Select Enable to enable Content Filtering.
Schedule: Select the item listed in the schedule to enable the policy to automatically execute
the function in a certain time and range.
Alarm Threshold: set a maximum flow rate (in Kbytes/Sec). An alarm will be sent if flow
rates are higher than the specified value.
Step 3: Click OK to add new policy or click Cancel to cancel adding.
- 254 -