NetMask: This will be the netmask of the DMZ network.
Ping: Select this to allow the DMZ network to ping the IP Address of the Multi-Homing
Gateway.
This will allow people from the Internet to be able to ping the Multi-Homing
Gateway. If set to enable, the device will respond to echo request packets from the DMZ
network.
Http: Select this to allow the device WEBUI to be accessed from the DMZ network. This will
allow the WebUI to be configured from a user on the Internet. Keep in mind that the device
always requires a username and password to enter the WebUI.
- 67 -